
Chapter 8 Major Subassemblies 8-29
9. Disconnect the DC switch assembly power connector from motherboard connector
J3504 (
FIGURE 8-18).
FIGURE 8-18 DC Switch Assembly Cable Routing
10. Remove the DC switch assembly power cable from the cable routing clips.
11. Remove the front panel (
FIGURE 8-19):
a. Remove the front panel bezel.
b. Remove the front panel nameplate and light pipe.
c. Using a number 2 Phillips-head screwdriver, remove the four screws securing
the front panel to the chassis.
d. Remove the front panel from the chassis.
DC power connector
J3504
DC power cable routing
Kommentare zu diesen Handbüchern